DIY | Dining Table Makeover

Before we moved to North Carolina, I printed out the floor plan of our new place and began sketching in where all of our furniture would go. Knowing that we would have a legitimate dining room for the first time, I was set on I getting a new dining room table to fit the space better than our breakfast table could. There was only one small problem... a new dining room table was just not in the budget. I mentioned in this post that I found this $20 library table on an online trading site. T-W-E-N-T-Y dollars, folks!

I had researched exactly what I wanted to do with the table before starting the project. My plan was to strip/sand down the table top to its bare wood, and then choose a stain and sealer, no paint. Then, I wanted to paint/wax the sides and legs of the table to look distressed. I have posted about some of my previous DIY furniture pieces before here and here, and in both projects, I used Annie Sloan chalk paint and waxes.

One morning, before Matt left for work, I asked him to get out the electric sander for me, because I was going to start on the table. Once he left, I got to work. I sanded the entire top of the table, and the color was definitely not what I was expecting. I loved it! It was then that I decided I did not want to stain the top anymore, and instead, I would just seal it.

Here are all of the products I ended up using for my table. On the left, the water-based, clear protective finish (sealer). I didn't want anything glossy, so this "Clear Satin" was perfect. On the right, you see I actually chose not to do an Annie Sloan brand of paint, but instead, I used a similar chalk paint that matched the color I was going for a little better. It was also cheaper. And, of course, I already had my trusty soft and dark waxes from Annie Sloan. (<-- game changers)

                         

         

      
















I coated the table top three (or four) times with the sealer, and in between each coat, it needed time to dry. So, the first thing I did after sanding the top was brush my first coat of sealer on the top. While that was drying, I painted the legs and sides of the table with the Vintage White paint. Notice, I did not strip or sand these parts of the table. This is by far my favorite part about using this chalk paint--not an insane amount of work.

After allowing both the sealer and the paint to dry, I went in for another coat of each. The paint dries very fast, so pretty soon after that, I was able to start waxing the sides and edges with the soft wax, followed by the dark, followed by a rag to brush strokes in the direction of the grain. This is what creates that distressed look that is so popular right now.

After allowing that to dry, and after another coat or two of the protective finish over the entire table, there was a finished product, and I couldn't be happier. It is exactly what I had envisioned before beginning the project, and even better, I did it myself.

If you think it looks good in our old space, just wait until I give you a peek into our new home with a picture-tour of our dining room.. coming soon!